Content Attributes
Temperatures are already plummeting in various parts of the country and winters are just around the corner. In such weather, the heating system of your home needs to be in perfect shape.
Everybody would agree that there is nothing worse than waking up cold in the middle of the night. It gets easier when all you have to do is to pull your sheets up but the situation gets worse when your house furnace is not working properly.
Identifying the problem is no easy task especially if you have no experience regarding furnaces. Here are some furnace heater repair tips to make the situation more comprehensible for you.
If you feel uncomfortable working with a furnace, your best bet is to hire a professional furnace repair service. The danger is not worth the few dollars you save from DIY repairs.
Let’s hop into the tips you should know.
1. Check The Thermostat
It may seem too obvious but it is one of the most commonly occurring issues. A faulty thermostat can cause the heating system to shut off. At times, all you need to do is to switch on the thermostat.
Check the heat settings. Ideally, it should be five degrees above room temperature. A lot of service calls are made without checking the power switch or thermostat settings.
If the settings are fine, you may need to check the thermostat battery. If your thermostat runs on battery, it flashes a warning signal when the batteries need replacement. Change the batteries once a year.
Check the fuse of the thermostat if needs replacement. If you have a programmable thermostat see if the date and time are correct on it. It may be the faulty timer. Readjust the settings.
When any of these tricks are not working you need to proceed to a service call or check the following things.
2. Reset Home Circuit Breaker
More often than not, the home circuit breaker switches the furnace off and homeowners keep on finding the problem at hand. All that needs to be done is to “on” the switch.
Go to your circuit breakers panel and see if the furnace switch is thrown to its “off” position. It is often caused by some power supply issue or a loose button. If the problem persists, hire a reliable Furnace Heater Service in your area.
3. Change The Filters
Clogged filters can also affect the function of the heating system. If you can’t remember the last time you changed or cleaned the filters, it may be the root of the issue. Read the manual to find out the filter replacement procedure. It takes only a few minutes.
4. Check The Safety Switch
There is a safety switch on every furnace. Before you hire the Best Furnace Heater Company for repairs, make sure the switch is in its intended place.
5. Clean The Burner Flames
Removing the debris from the burner assembly is highly recommended. The soot can accumulate and affect the heating efficiency of the furnace.